319 pritsche - L319-forum.de  

319 pritsche

Alles was ihr loswerden wollt zum Thema 319
Antworten

Benutzeravatar
Jean-Manuel
Beiträge: 103
Registriert: 17.11.2014, 22:22
Wohnort: Montesson, France

Re: 319 pritsche

Beitragvon Jean-Manuel » 25.02.2015, 21:05

I go and visit it on saturday.
I hope there is not too much rust.
I'll tell you about it.

Ich gehen und besuchen Sie sie auf Samstag .
Ich hoffe, es ist nicht zu viel Rost.
Ich werde Ihnen davon zu erzählen.


Bild

Bild

Bild

Benutzeravatar
rgro
Beiträge: 21
Registriert: 29.12.2011, 11:26

Re: 319 pritsche

Beitragvon rgro » 01.03.2015, 20:20

Have You visit it?
How it looks like?
Tell about it :)

Benutzeravatar
Jean-Manuel
Beiträge: 103
Registriert: 17.11.2014, 22:22
Wohnort: Montesson, France

Re: 319 pritsche

Beitragvon Jean-Manuel » 01.03.2015, 22:07

Hello !

Sorry I've been busy until now, so I couldn't write about my visit

So far so good, I bought it even if it's far from beeing perfect.
Now I must find a company to transport it from Dijon to Paris (>300km) because it cannot go on its wheels.

First the major problems that I have to solve :
- the brake fluid gets out from the front right brake, so the brakes don't work, but the hand brake works fine
- the front and rear lights work, but turning lights don't work
So I have to make those repairs before presenting this 319 at "Contrôle technique" (=TÜV)

The engine turns perfectly well but with a lot of smoke : probably the segmentation...
There is more rust than the photos showed : the front wings have been badly repaired, but the rest of the body looks fine.

So, if this 319 gets the TUV, I'll try to make it look better, otherwise it could be a good giver for another one. :)

A few pictures of my visit :

Hallo!

Sorry, ich war beschäftigt Bis jetzt, so dass ich konnte nicht von meinem Besuch zu schreiben

So weit so gut, kaufte ich es auch wenn es weit von beeing perfekt.
Jetzt muss ich ein Unternehmen, dem Transport von Dijon nach Paris (> 300 km) zu finden, weil es nicht auf Rädern ict zu gehen.

Zuerst werden die Hauptprobleme zu lösen, dass ich-haben:
- Die Bremsflüssigkeit aus dem vorderen rechten Brems, so dass die Bremsen funktionieren nicht, trank die Handbremse funktioniert
- Der Kopf und Rückleuchten arbeiten, trank Abbiegelicht funktionieren nicht
Also muss ich Reparaturen Diejenigen Vor der Vorstellung dieser 319 bei "Technische Kontrolle" zu machen (= TÜV)

Der Motor dreht sich sehr gut mit viel Rauch Ziel: wahrscheinlich der Segmentierung ...
Es gibt mehr als Rost Die Bilder zeigten: die vorderen Kotflügel-haben-ist schlecht repariert, aber der Rest des Körpers sieht gut aus.

Also, wenn diese 319 erhält den TÜV, werde ich versuchen, es besser aussehen, sonst könnte es sein, eine gute Geber für ein anderes. :)

Ein paar Bilder von meinem Besuch:


1
Bild

2
Bild
Are these lights correct ? Sind diese Leuchten nicht wahr?

3
Bild

4
Bild

5
Bild

6
Bild

7
Bild
There are 3 seats, but in the official documents only 2 seats are specified : are those seats correct ones ?
Es gibt drei Sitze, trank in den offiziellen Dokumenten nur 2 Sitze festgelegt werden: Diese Sitze sind richtigen?

8
Bild

9
Bild

10
Bild

11
Bild

12
Bild

13
Bild

14
Bild

15
Bild

16
Bild

17
Bild

18
Bild

19
Bild

20
Bild

21
Bild

Benutzeravatar
Uwe
Beiträge: 551
Registriert: 29.05.2007, 20:25
Kontaktdaten:

Re: 319 pritsche

Beitragvon Uwe » 02.03.2015, 20:12

felicitation et bonne chance, uwe

Benutzeravatar
Jean-Manuel
Beiträge: 103
Registriert: 17.11.2014, 22:22
Wohnort: Montesson, France

Re: 319 pritsche

Beitragvon Jean-Manuel » 02.03.2015, 23:32

Viel danke ! :top:
I will need a lot of luck. :wink:

Benutzeravatar
Brad
Beiträge: 64
Registriert: 28.05.2007, 08:54
Wohnort: Australia

Re: 319 pritsche

Beitragvon Brad » 04.03.2015, 13:06

It dosent look to bad concidering its 50 years young.
I hope it all works out :top:

Benutzeravatar
Jean-Manuel
Beiträge: 103
Registriert: 17.11.2014, 22:22
Wohnort: Montesson, France

Re: 319 pritsche

Beitragvon Jean-Manuel » 05.01.2016, 22:59

Last week my L319D passed successfully the "contrôle technique" (french TÜV).
It passed the TÜV with difficulties due to it's brand new breaks...

So today I could register it officially as mine ! :klatsch:
Here it is with it's 7 brand new wheels I bought at Reinhard KAINZMAIER's :top: :
Bild

Bild

Only a few days before I drive it to it's new home ! :D

Benutzeravatar
Jean-Manuel
Beiträge: 103
Registriert: 17.11.2014, 22:22
Wohnort: Montesson, France

Re: 319 pritsche

Beitragvon Jean-Manuel » 15.01.2016, 00:07

Today, for the very first time, I drove my L319D :

But before getting home, I've had a break-down : the brand new battery got low, so I decide to send the L319D back to the garage for a checkup of the problem.
Zuletzt geändert von Jean-Manuel am 06.03.2016, 01:27, insgesamt 1-mal geändert.

Benutzeravatar
Esslinger
Beiträge: 19
Registriert: 05.04.2015, 22:11

Re: 319 pritsche

Beitragvon Esslinger » 15.01.2016, 08:11

Great Video! :top:
Thank you for sharing it! :klatsch:
Schrott? Werkstoff für Helden! :scheinheilig:

Benutzeravatar
Nitja
Beiträge: 480
Registriert: 13.11.2011, 00:19
Wohnort: 72636 Frickenhausen
Kontaktdaten:

Re: 319 pritsche

Beitragvon Nitja » 15.01.2016, 14:13

:klatsch: good luck and always keep calm :klatsch:
Nitja

Benutzeravatar
Jean-Manuel
Beiträge: 103
Registriert: 17.11.2014, 22:22
Wohnort: Montesson, France

Re: 319 pritsche

Beitragvon Jean-Manuel » 13.02.2016, 00:28

Here we are !
Today my L319D PristchenWagen arrived at home ! :klatsch:
Bild

During the trip, the right rear brake blocked progressively. :? When I finally could stop, there was a lot of smoke...
Then I just engaged the rear gear and went forward a few meters : it was enough to unblock the brake. :wink:

Benutzeravatar
Jean-Manuel
Beiträge: 103
Registriert: 17.11.2014, 22:22
Wohnort: Montesson, France

Re: 319 pritsche

Beitragvon Jean-Manuel » 14.02.2016, 00:02

Today, I went to a meeting I organised for the Mercedes-Benz Club of France : I'm in charge of the Youngtimers section of the club.

I'ts not because I'm in charge of the Youngtimers that I'm obliged to go with one of my "Youngsters", so I went with my "brand new" L319D :
Bild
Here with another oldtimer, a 220S Ponton at the meeting

Bild
With a 280slc at the restaurant after the meeting.

Bild
With a c126 500 sec

Bild
With a w123 200e

Bild
And with a 107 280sl

My L319D has had a great success today !

Benutzeravatar
uley 319
Beiträge: 32
Registriert: 28.08.2009, 22:33

Re: 319 pritsche

Beitragvon uley 319 » 14.02.2016, 01:54

Wow, well done, that is one nice looking pick up. Seems you had to do very little work for the controle technique (MOT in UK). A bientot, bon chance avec votre camion, Jamie

Benutzeravatar
Jean-Manuel
Beiträge: 103
Registriert: 17.11.2014, 22:22
Wohnort: Montesson, France

Re: 319 pritsche

Beitragvon Jean-Manuel » 16.02.2016, 22:48

Yesterday I was talking with Wolfram, then I decided to look a few things on my L319D.
When it was presented to the "Contrôle technique" (french TÜV), they didn't find the serial number on the frame. So I cleaned the fromt right "bar" and I discovered the serial number qich was hidden by mud...
Bild
It is the correct number :klatsch: : I had doubts. :oops:

Why did I have doubts ? Because of the engine that seems not to be one build for the L319D, but for the w110 200d : the OM621 VIII (621.918).
Bild


Antworten

Zurück zu „Zu verkaufen“

Wer ist online?

Mitglieder in diesem Forum: 0 Mitglieder und 15 Gäste