[restoration] L319D - 1958 - Seite 9 - L319-forum.de  

[restoration] L319D - 1958

Bilder und Beschreibungen von Restaurierarbeiten oder auch selbstherstellen von Ersatzteilen oder Werkzeugen. Sowie Tipps und Tricks die das Arbeiten erleichtern
Antworten
Benutzeravatar
panzerjim
Beiträge: 139
Registriert: 19.04.2015, 07:14
Wohnort: Bretagne (France)
Kontaktdaten:

Re: [restoration] L319D - 1958

Beitragvon panzerjim » 22.09.2017, 20:29

So, the engine preheats well and turns well with the starter:



and it starts but it turns like a potato. I had to use a verry little bit from start pilot to launch it . I did not dare to let it run longer because no cooling system. he turn like the last time before the screw ran away and knocked out my rocker rod!



to be continued ... :top:
Zuletzt geändert von panzerjim am 22.09.2017, 22:14, insgesamt 1-mal geändert.
we can't make new with old .... but we try 8)

Benutzeravatar
kaasenco66
Beiträge: 217
Registriert: 03.07.2007, 00:50

Re: [restoration] L319D - 1958

Beitragvon kaasenco66 » 22.09.2017, 21:41

:top: :top:

Benutzeravatar
panzerjim
Beiträge: 139
Registriert: 19.04.2015, 07:14
Wohnort: Bretagne (France)
Kontaktdaten:

Re: [restoration] L319D - 1958

Beitragvon panzerjim » 24.09.2017, 21:00

I had to insist many timesbut now that works without start pilot!



and after having purged the system of diesel, it turns very well ! it smokes a bit but I put that on the back of the moisture and the first real start, the time that everything cleans. we will see later if it continues


next step, mount and fill the cooling system ! :klatsch:
we can't make new with old .... but we try 8)

Benutzeravatar
panzerjim
Beiträge: 139
Registriert: 19.04.2015, 07:14
Wohnort: Bretagne (France)
Kontaktdaten:

Re: [restoration] L319D - 1958

Beitragvon panzerjim » 22.10.2017, 19:07

a little mechanics on this Sunday!

I start by changing my nipple brake jar, until then ... not too complicated!

Bild

Yesterday, I went to put a paint on the radiator, I did checked it and it is in perfect condiction except a few fins a little twisted! cool :D

Bild

receiving new cooling hoses!

Bild

everybody is in place !

Bild

Bild

Bild

Bild

radiator in place !

Bild

I put all in water and disaster! leak on the water pump! I empty, I disassemble the water pump and of course, the round seal has dry and it died .... so i have to change the water pump because the circulation fin has broken during disassembly! :Wandhauer:

Bild

Bild


so ! another 100 € ticket that will fly for the water pump ...

is this water pump ok for my om636 ?

https://www.mbclassics.de/water-pump-OM636-M136

here is mine :

Bild

to be continued !
we can't make new with old .... but we try 8)


Antworten

Zurück zu „Restaurierungsdokumentationen und Reparaturanleitungen“

Wer ist online?

Mitglieder in diesem Forum: 0 Mitglieder und 1 Gast

cron